For Android users, connecting your WaterRower to the WATERROWER Connect app via USB is a straightforward process. This guide will walk you through each step to ensure a smooth setup.

Requirements

• An Android device with a USB port.

• A USB cable compatible with your device and the WaterRower.

• A WaterRower with a Version 2 S4 monitor (this has a USB plug on the back).

Step-by-Step Connection Guide

Step 1: Locate the S4 Monitor's USB Port

• Find the USB port located on the back of the WaterRower’s S4 monitor.

Step 2: Connect the USB Cable

• Plug one end of the USB cable into the S4 monitor.

• Connect the other end of the USB cable to your Android device.

Step 3: Enable USB Connection on Your Device

• A notification may appear on your device asking for permission to connect to the WaterRower. Tap 'Yes' or 'Allow'.

Step 4: Launch the WATERROWER Connect App

• Open the WATERROWER Connect app on your Android device.

• Tap the connection icon in the top right corner on the dashboard.

• The app should automatically detect the WaterRower once the USB connection is established.

Step 5: Confirm Connection

• Once connected, the equipment list should have a green checkmark next to the device.

• A "PC" symbol should be visible on the S4 monitor.

• If the connection isn’t successful, check the cable connections, and ensure your device’s USB settings are correctly configured.

Troubleshooting Tips

• Ensure that your Android device supports USB connections.

• Try a different USB cable if the connection isn’t established.

• Restart both your Android device and the WaterRower and attempt to reconnect.